If you are looking for versatile wall lighting for a kitchen or family room, our stunning Single Howard Wall Light might fit the bill. In its design, we have combined an elegant brass shade that act as a downlighter, with a sturdy brass wall bracket that will add character to any setting. The Single Howard shade incorporates a ball joint so it can be angled wherever you need it - great for general tasking.As with all our wall lights, the Single Howard combines the best of modern design technology with old fashioned styling flair to create lighting that will make a statement wherever it is fitted. This light is handcrafted from solid, natural brass to fit in with the trend for warm metallic fittings in modern kitchen designs and is antiqued for a subtle, aged appearance
This light is wired to the left. It can be wired to the right as a bespoke modification for a small additional cost upon request. For more information, please see our
Bespoke Services > guide. This single wall light is also available as a
double.
- We recommend our E27 bulb as the perfect accompaniment to your light as it lights up to full strength instantly, is dimmable and will flood your area with a soft warm light.
- Kindly note that the very bottom of the bulb protrudes slightly from the edge of the brass shade. This is integral to its design and is not noticeable if you angle the shade towards the wall. However, If you don't wish for this affect, you will need to find an alternative bulb such as an E27 Golf Ball that is smaller in size (not available at Jim Lawrence).
PRODUCT INFORMATION
Bulb Holder: Large edison screw
Recommended LED Bulb: see recommended accessories
Fitting Option: This light is suitable for Europe as it is supplied with an
E27 (large Edison Screw)
Dimensions: 30.4W x 34.8H x 19.6D (cm)
Additional information: Flush-fitting backplate, please refer to our
guide for further details or call us for advice
KNOWLEDGE BASE GUIDES
Our Backplates ExplainedLighting Your HomeEverything you need to know about bulbsWall light Fitting guide
FINISH
Antiqued Brass: A beautiful natural finish produced by distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. Should you wish to lighten it, you will need to buff it occasionally with a small amount of brass cleaner to return it to its original hue. To discover more about our finishes and how best to maintain them, check out our
product finish page.