Butterfly Hinge in Beeswax 

Item No
536BW
|
9.5W x 5H x 0.7D (cm)
£12.80 Price Per Item
8 available now - more by 11/01/2025
Order Quantity
Qty of Item


Click here for all the details ...

RECOMMENDED ACCESSORIES

Bembridge Door Stop in Beeswax
11 available now - more by 18/01/2025
£26.51
Order Quantity
Stoke Latch in Beeswax
10 available now - more by 18/01/2025
£40.73
Order Quantity
Security Pin for Latches in Beeswax
18 available now - more by 18/01/2025
£11.00
Order Quantity
Reeded Door Knob, Bristol Short Plate, Beeswax
Order now for dispatch by 04/01/2025
£89.10
Order Quantity
DESCRIPTION
As pretty as they are practical, these traditional butterfly hinges will work to secure any door in your home. Nothing sums up the look and feel of a period home than the classic, handcrafted metalwork that was used to adorn it. In an age when adornment was unaffordable for most, blacksmiths designed home fittings to be as decorative as they were practical, so these hinges will not only look good on your doors, but should last for many years to come.

Shown above in our beeswax finish, this butterfly hinge is made in our forge and then dipped in hot beeswax for a classic soft black finish that has been used since Tudor times. All Jim Lawrence products are made using traditional metalworking techniques that have been passed down through the generations and are hand finished to the highest standards at our Suffolk workshops.

Our butterfuly butt hinges are suitable for hanging most sized doors as well as cabinets and trunk or chest lids. Generally used in pairs and fitted to the top and bottom of your door, you may need to use a third in the middle for larger or heavier doors.
  • Supplied with fixing screws in the same finish
  • When fitting, we recommend you drill a pilot hole – or small starting hole - for each screw first.  For more advice, please see our Screw Fitting Guide >
We do not recommend the beeswax finish for bathrooms or outdoor use, as it may rust in a humid environment.

PRODUCT INFORMATION


Dimensions: 9.5W x 5H x 0.7D (cms)

Finish: Beeswax
- A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives it a lovely soft black wrought iron effect that looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be re-waxed occasionally. For more information please see our Product Finishes > pages.


KNOWLEDGE BASE GUIDES


How to Clean Beeswax
Orders Deliveries & Returns
Bespoke Service
As pretty as they are practical, these traditional butterfly hinges will work to secure any door in your home. Nothing sums up the look and feel of a period home than the classic, handcrafted metalwork that was used to adorn it. In an age when adornment was unaffordable for most, blacksmiths designed home fittings to be as decorative as they were practical, so these hinges will not only look good on your doors, but should last for many years to come.

Shown above in our beeswax finish, this butterfly hinge is made in our forge and then dipped in hot beeswax for a classic soft black finish that has been used since Tudor times. All Jim Lawrence products are made using traditional metalworking techniques that have been passed down through the generations and are hand finished to the highest standards at our Suffolk workshops.

Our butterfuly butt hinges are suitable for hanging most sized doors as well as cabinets and trunk or chest lids. Generally used in pairs and fitted to the top and bottom of your door, you may need to use a third in the middle for larger or heavier doors.
  • Supplied with fixing screws in the same finish
  • When fitting, we recommend you drill a pilot hole – or small starting hole - for each screw first.  For more advice, please see our Screw Fitting Guide >
We do not recommend the beeswax finish for bathrooms or outdoor use, as it may rust in a humid environment.

PRODUCT INFORMATION


Dimensions: 9.5W x 5H x 0.7D (cms)

Finish: Beeswax
- A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives it a lovely soft black wrought iron effect that looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be re-waxed occasionally. For more information please see our Product Finishes > pages.


KNOWLEDGE BASE GUIDES


How to Clean Beeswax
Orders Deliveries & Returns
Bespoke Service

Customers also bought

Chester Wall Light in Beeswax
Order now for dispatch by 18/01/2025
£128.92
Order Quantity
Single Gosford Wall Light in Beeswax
10 available now - more by 18/01/2025
£119.74
Order Quantity
Monkey Tail Lockable Latch (Right) in Beeswax
Order now for dispatch by 11/01/2025
£38.76
Order Quantity
Hunstanton Velvet Cushion Cover in Burnt Orange (50cm x 50cm)
Order now for dispatch by 11/01/2025
£37.00
Order Quantity

Recently Viewed

Butterfly Hinge in Beeswax
8 available now - more by 11/01/2025
£12.80
Order Quantity