DESCRIPTION A beautiful 2 gang forged iron grid switch hand forged from high quality steel and beeswaxed for a traditional, soft black look that will add a touch of contemporary style to any room in your home. Our modular grid (rocker) switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your home, or an uneven, hammered edge for a more rustic feel.Each switch is 20amp, 2 way which means it can be used for switching lights from either one or two places such as from the top and bottom or your stairs. If you need to switch the light on from more than 2 positions (e.g. middle of the stairs) you will need an intermediate module which can be added for a small additional cost upon request. All Jim Lawrence products are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.Wallpaper shown: Kent by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mmFAQs: For more information about our switches please read our Guide to Switches & SocketsWiring: How to Wire Switches And SocketsAdditional Information: We can provide bespoke switch configurations with the same classic design upon request. Please call our sales team to discuss your requirements.FINISHBeeswax: A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives it a lovely soft black wrought iron effect that looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be re-waxed occasionally.Kindly note, we do not recommend the beeswax finish for use in a humid environment, as it is harder to maintain and may rust. We feel Matt Black is a preferable option.
A beautiful 2 gang forged iron grid switch hand forged from high quality steel and beeswaxed for a traditional, soft black look that will add a touch of contemporary style to any room in your home. Our modular grid (rocker) switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your home, or an uneven, hammered edge for a more rustic feel.Each switch is 20amp, 2 way which means it can be used for switching lights from either one or two places such as from the top and bottom or your stairs. If you need to switch the light on from more than 2 positions (e.g. middle of the stairs) you will need an intermediate module which can be added for a small additional cost upon request. All Jim Lawrence products are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.Wallpaper shown: Kent by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mmFAQs: For more information about our switches please read our Guide to Switches & SocketsWiring: How to Wire Switches And SocketsAdditional Information: We can provide bespoke switch configurations with the same classic design upon request. Please call our sales team to discuss your requirements.FINISHBeeswax: A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives it a lovely soft black wrought iron effect that looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be re-waxed occasionally.Kindly note, we do not recommend the beeswax finish for use in a humid environment, as it is harder to maintain and may rust. We feel Matt Black is a preferable option.